IF SAW Filter
Part Number Package Application Last Modified
813-IF133.5M-26A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF133.5M-26A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 133.5 - MHz
Insertion Loss Fo - 22.7 25.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +70 C
Storage Temperature - -40 - +80 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation Fo 12.5 MHz - 0.90 1.20 dB
Group Delay Variation Fo 12.5 MHz - 40 80 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 24.96 26.20 - MHz 
-20 dB - 27.50 27.90
-20 dB - 28.10 28.40
-30 dB - 28.45 28.70
-45 dB - 28.80 -
Absolute Delay Fo - 1.42 - usec
Ultimate Rejection - 45 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF133.5M-26A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map