IF SAW Filter
Part Number Package Application Last Modified
813-SL128.0625M-02A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL128.0625M-02A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 127.9625 128.0625 128.1625 MHz
Insertion Loss Fo - 20.0 24.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -0 - +60 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation Fo 0.9375 MHz - 0.4 1.0 dB
Group Delay Variation Fo 0.9375 MHz - 60 120 nsec
Temperature Coefficient - - -0.03 - ppm/C
Bandwidth -1 dB 1.875 2.240 - MHz 
-30 dB - 3.710 -
-40 dB - 3.890 4.50
Absolute Delay Fo - 1.72 - usec
Relative Attenuation Fo 2.1625 MHz 30 60 - dB
Ultimate Rejection - 48 53 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL128.0625M-02A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map