IF SAW Filter
Part Number Package Application Last Modified
813-SL122.5M-20A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL122.5M-20A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 122.5 - MHz
Insertion Loss Fo - 14.50 16.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 9.52 MHz - 0.32 0.80 dB
Group Delay Variation Fo 9.52 MHz - 22 50 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 20.50 20.88 - MHz 
-3 dB 21.30 21.53 -
-40 dB - 24.26 24.50
Absolute Delay Fo - 1.01 - usec
Relative Attenuation Lower Sidelobe 40 48 - dB
Upper Sidelobe 40 48 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL122.5M-20A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map