IF SAW Filter
Part Number Package Application Last Modified
813-IF120.0M-19A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF120.0M-19A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 120.0 - MHz
Insertion Loss Fo - 20.20 22.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 9.22 MHz - 0.62 1.00 dB
Group Delay Variation Fo 9.22 MHz - 35 80 nsec
Ultimate Rejection - 48 53 - dB
Bandwidth -1 dB - 19.44 - MHz 
-3 dB 19.60 19.90 -
-40 dB - 21.70 22.00
Absolute Delay Fo - 1.52 - usec
Relative Attenuation Fo 10.8 MHz 48 53 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF120.0M-19A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map