IF SAW Filter
Part Number Package Application Last Modified
813-IF120.0M-14B 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SIF120.0M-14B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 120.1 - MHz
Insertion Loss Fo - 22.3 24.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation Fo 7.15 MHz - 0.87 1.00 dB
Group Delay Variation Fo 7.15 MHz - 47 70 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 14.70 14.82 - MHz 
-3 dB - 15.25 -
-40 dB - 17.13 17.20
Absolute Delay Fo - 1.56 - usec
Relative Attenuation Fo 8.3 MHz 15 20 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF120.0M-14B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map