IF SAW Filter
Part Number Package Application Last Modified
813-IF120.3M-10A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SIF120.3M-10A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 120.3 - MHz
Insertion Loss Fo - 20.5 22.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -5 - +65 C
Storage Temperature - -30 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 5.00 MHz - 0.50 - dB
Group Delay Variation Fo 5.00MHz - 52 90 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 10.40 10.55 - MHz 
-3 dB - 11.05 -
-25 dB - 12.55 12.70
-40 dB - 12.90 13.30
Absolute Delay Fo - 1.61 - usec
Relative Attenuation Lower Sidelobe 48 52 - dB
Upper Sidelobe 48 52 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF120.3M-10A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map