IF SAW Filter
Part Number Package Application Last Modified
813-IF110.0M-04A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF110.0M-04A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 109.9 110.0 110.1 MHz
Insertion Loss Fo - 19.0 22.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -5 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 2.2 MHz - 0.6 1.0 dB
Group Delay Variation Fo 2.2 MHz - 95 150 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 4.40 4.82 - MHz 
-3 dB - 5.12 -
-40 dB - 6.35 6.50
Absolute Delay Fo - 1.68 2.00 usec
Ultimate Rejection - 40 48 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF110.0M-04A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map