IF SAW Filter
Part Number Package Application Last Modified
813-SL109.5M-20A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL109.0M-20A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 109.5 - MHz
Insertion Loss Fo - 13.5 15.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +70 C
Storage Temperature - -30 - +80 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 9.22 MHz - 0.45 1.0 dB
Group Delay Variation Fo 9.22 MHz - 35 80 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 18.44 20.3 - MHz 
-10 dB - 21.9 22.3
-20 dB - 22.6 23.0
-30 dB - 23.3 23.6
-40 dB - 24.0 -
Absolute Delay Fo - 1.16 - usec
Ultimate Rejection - 40 45 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL109.5M-20A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map