IF SAW Filter
Part Number Package Application Last Modified
813-IF108.8M-03A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF108.8M-03A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 108.70 108.80 108.90 MHz
Insertion Loss Fo - 21.10 23.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -5 - +65 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 1.50 MHz - 0.35 0.90 dB
Group Delay Variation Fo 1.50 MHz - 80 130 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 3.60 3.93 - MHz 
-3 dB 4.00 4.33 -
-25 dB - 5.55 5.70
-40 dB - 5.88 6.10
Absolute Delay Fo - 1.41 1.60 usec
Ultimate Rejection - 45 52 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF108.8M-03A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map