IF SAW Filter
Part Number Package Application Last Modified
809-SL62.5M-21A 9.1 x 4.8 SMD IF SAW Filter January 2011

PART NUMBER :
809-SL62.5M-21A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 62.50 - MHz
Insertion Loss Fo - 15.80 18.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Absolute Delay Fo 9.22 MHz - 0.66 - usec
Group Delay Variation Fo 9.22 MHz - 17 35 nsec
Temperature Coefficient - - -86 - ppm/C
Passband Ripple Fo 9.22 MHz - 0.30 0.70 dB
Bandwidth -1 dB 20.80 21.30 - MHz
-3 dB 21.80 22.82 -
-20 dB - 26.80 -
-30 dB - 28.10 28.60
-40 dB - 29.25 30.00
Ultimate Rejection - - 40 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
1, 3, 4, 5, 6, 8, 9, 10 Ground
2 In
7 Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
809-SL62.5M-21A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map