IF SAW Filter
Part Number Package Application Last Modified
809-SL62.5M-06C 9.1 x 4.8 SMD IF SAW Filter January 2011

PART NUMBER :
809-SL62.5M-06C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 62.50 - MHz
Insertion Loss Fo - 9.60 13.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Absolute Delay Fo - 0.95 - usec
Group Delay Variation Fo 2.4 MHz - 69 100 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 6.00 6.62 - MHz 
-3 dB - 7.62 -
-30 dB - 10.40 10.80
Passband Ripple Fo 2.4 MHz - 0.37 0.80 dB
VSWR Input - 3.5 - -
Output - 5.5 -
Ultimate Rejection - - 42 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
1, 3, 4, 5, 6, 8, 9, 10 Ground
2 In
7 Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
809-SL62.5M-06C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map