IF SAW Filter
Part Number Package Application Last Modified
807-SL96.0M-22A 7.0 x 5.0 SMD Bandpass Filter January 2011

PART NUMBER :
807-SLF96.0M-22A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 96.0 - MHz
Insertion Loss 86.0 ~ 106.0 MHz - 9.5 12.0 dB
Maximum DC Voltage - - - 30 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple 86.0 ~ 106.0 MHz - 0.65 1.2 dB
Group Delay Ripple 86.0 ~ 106.0 MHz - 60 100 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1.0 dB - 22.0 - MHz 
-40.0 dB - 28.3 -
Input IP3 - 35 45 - dBm
Relative Attenuation to I.L. @out of pass band (Rejection) 0 ~ 68.4 MHz 51 60 - dB
76.8 MHz 40 50 -
123.6 ~ 162.8 MHz 56 63 -
162.8 ~ 1000.0 MHz 35 45 -
VSWR - - 3 - -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, F, G, H Ground
I Input or Return
J Return or Input
D Output or Return
E Return or Output
Single-Ended Operation Return is Ground
Differential Operation Return is Hot

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
807-SL96.0M-22A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map