IF SAW Filter
Part Number Package Application Last Modified
807-SL380.0M-10A 7.0 x 5.0 SMD IF SAW Filter January 2011

PART NUMBER :
807-SL380.0M-10A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 380.00 - MHz
Insertion Loss Fo - 8.50 10.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation

Fo 1.5 MHz

- 0.90 1.50 dB
Group Delay Variation Fo 1.5 MHz - 75 120 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -3.0 dB - 13.90 - MHz 
-40.0 dB - 22.60 24.00
Absolute Delay Fo - 0.36 - usec
Attenuation Fo +140MHz 50 55 - -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, E, F, G, H, J Ground
I In
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
807-SL380.0M-10A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map