IF SAW Filter
Part Number Package Application Last Modified
807-SL138.24M-20B 7.0 x 5.0 SMD IF SAW Filter January 2011

PART NUMBER :
807-SL138.24M-20B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 138.24 - MHz
Insertion Loss Fo - 9.6 11.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation 128.24 ~ 148.24 MHz - 0.3 1.0 dB
Group Delay Variation 128.24 ~ 148.24 MHz - 25 50 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1.0 dB - 22.4 - MHz 
-3.0 dB - 23.7 -
-40.0 dB - 30 -
Absolute Delay Fo - 0.72 - usec
Relative Attenuation 10.00 MHz ~ 108.24 MHz 54 58 - dB 
108.24 MHz ~ 117.52 MHz 50 53 -
122.88 MHz 45 53 -
220.40 MHz ~ 271.12 MHz 58 75 -
271.12 MHz ~ 1000.00 MHz 40 70 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, E, F, G, H, J Ground
I In
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
807-SL138.24M-20B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map