IF SAW Filter
Part Number Package Application Last Modified
807-SL110.0M-A 7.0 x 5.0 SMD IF SAW Bandpass Filter January 2011

PART NUMBER :
807-SL110.0M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 110.0 - MHz
Insertion Loss Fo - 10.0 11.5 dB
Maximum DC Voltage - - - 3 V
Maximum Input Power - - - 20 dBm
Operating Temperature - -20 - +85 C
Storage Temperature - -40 - +105 C
Source Impedance balanced ended * - 1000 - ohm
Load Impedance balanced ended * - 500 - ohm
Amplitude Ripple Fo 0.3 MHz - 0.55 1.0 dB
Bandwidth -5.0 dB 0.630 0.660 - MHz 
-33.0 dB - 0.890 -
Temperature Coefficient - - -0.03 - ppm/C
Phase Linearity Fo 0.615 MHz - 3.5 4.5 deg RMS  
Fo 0.620 MHz - 3.5 4.5
Template on the amplitude, reference is loss at Fc Fc 0.63 MHz - 4.5 5.0 dB
Fc 0.9 MHz 32 35 -
Fc 1.7 MHz 33 36 -
Fc 2 MHz 35 37 -
Fc 9 MHz 45 48 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, F, G, H Ground
I Input +
J Input -
D Output +
E Output -

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
807-SL110.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map