IF SAW Filter
Part Number Package Application Last Modified
807-SL110.59M-01A 7.0 x 5.0 SMD IF SAW Filter January 2011

PART NUMBER :
807-SL110.59M-01A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 110.59 - MHz
Insertion Loss - - 8.41 10.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Absolute Delay - - 0.78 - usec
Group Delay Variation Fo 0.6 MHz - 131 200 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -3.0 dB 1.152 1.41 - MHz 
-30.0 dB - 3.19 -
Relative Attenuation DC ~ Fo -3.4MHz 38 48 - dB
Fo -3.4MHz ~ Fo -1.728MHz 28 47 -
Fo +1.728MHz ~ Fo +3.4MHz 28 33 -
Fo +3.4MHz ~ 200MHz 38 48 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, E, F, G, H, J Ground
I In
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
807-SL110.59M-01A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map