IF SAW Filter
Part Number Package Application Last Modified
835-IF75.0M-F 35.0 x 12.8 Thru Hole Base Station & Repeater May 24 2003
.
TYPE :
75.0 MHz Bandpass Filter
19.0 MHz Bandwidth

PART NUMBER :
835-IF75.0M-F
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 75.00 - MHz
Insertion Loss - 24.50 26.0 dB
1dB Bandwidth 18.70 18.85 - MHz
3dB Bandwidth 19.00 19.17 - MHz
18dB Bandwidth - 19.95 20.10 MHz
33dB Bandwidth - 20.28 20.40 MHz
50dB Bandwidth - 20.48 20.70 MHz
Passband Ripple - 0.65 1.0 dB
Group Delay Variation - 50 100 nsec
Ultimate Rejection 50 55 - dB
Absolute Delay - 2.87 - µsec
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 120nH C1 = 56pF
L2 = 180nH C2 = 39pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF75.0M-F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map