IF SAW Filter
Part Number Package Application Last Modified
835-IF75.0M-E 35.0 x 12.8 Thru Hole Base Station & Repeater May 24 2003
.
TYPE :
75.0 MHz Bandpass Filter
19.20 MHz Bandwidth

PART NUMBER :
835-IF75.0M-E
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.95 75.00 75.05 MHz
Insertion Loss - 24.0 26.0 dB
1dB Bandwidth 18.90 19.00 - MHz
3dB Bandwidth 19.20 19.40 - MHz
18dB Bandwidth - 20.20 20.40 MHz
33dB Bandwidth - 20.50 20.70 MHz
50dB Bandwidth - 20.70 20.90 MHz
Passband Ripple - 0.65 1.0 dB
Group Delay Variation - 65 100 nsec
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 120nH C1 = 62pF
L2 = 180nH C2 = 43pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF75.0M-E

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map