IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-Q 35.0 x 12.8 Thru Hole Base Station & Repeater May 02 2003
.
TYPE :
70.0 MHz Bandpass Filter
1.5 MHz Bandwidth

PART NUMBER :
835-IF70.0M-Q
.
Horizontal : 0.5 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.3 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.94 70.00 70.06 MHz
Insertion Loss - 23.5 25.0 dB
1dB Bandwidth 1.3 1.5 - MHz
3dB Bandwidth 1.5 1.7 - MHz
40dB Bandwidth - 2.4 2.6 MHz
Passband Ripple - 0.3 0.8 dB
Group Delay Variation - 100 200 µsec
Absolute Delay - 3.7 - µsec
Ultimate Rejection 50 53 - dB
Substrate Material - Qz - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 220nH C1 = 75pF
L2 = 267nH C2 = 56pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF70.0M-Q

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map