IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-P 35.0 x 12.8 Thru Hole Base Station & Repeater May 02 2003
.
TYPE :
70.0 MHz Bandpass Filter
250 KHz Bandwidth

PART NUMBER :
835-IF70.0M-P
.
Horizontal : 0.3 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.06 MHz/Div
Veritical : 1 dB/Div
Veritical : 200 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.94 70.00 70.06 MHz
Insertion Loss - 17.5 20.0 dB
1dB Bandwidth 0.16 0.18 - MHz
3dB Bandwidth 0.25 0.30 - MHz
40dB Bandwidth - 0.9 1.0 MHz
Passband Ripple - 1.2 1.5 dB
Group Delay Variation - 300 1000 µsec
Absolute Delay - 3.7 - µsec
Ultimate Rejection 50 60 - dB
Substrate Material - Qz - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 120nH C1 = 62pF
L2 = 100nH C2 = 27pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF70.0M-P

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map