IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-JA 35.0 x 12.8 Thru Hole Base Station & Repeater May 24 2003
.
TYPE :
70.0 MHz Bandpass Filter
20.5 MHz Bandwidth

PART NUMBER :
835-IF70.0M-JA
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.94 70.00 70.06 MHz
Insertion Loss - 22.0 23.0 dB
1dB Bandwidth 20.20 20.25 - MHz
3dB Bandwidth 20.50 20.55 - MHz
40dB Bandwidth - 21.69 21.80 MHz
50dB Bandwidth - 21.80 22.00 MHz
Passband Ripple - 0.70 1.0 dB
Group Delay Variation - 65 100 nsec
Absolute Delay - 2.65 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 150nH C1 = 43pF
L2 = (150+39)nH C2 = 39pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF70.0M-JA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map