IF SAW Filter
Part Number Package Application Last Modified
835-IF115.0M-B 35.0 x 12.8 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
115.0 MHz Bandpass Filter
26.10 MHz Bandwidth

PART NUMBER :
835-IF115.0M-B
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 114.91 115.00 115.09 MHz
Insertion Loss - 23.1 25.0 dB
1dB Bandwidth 25.5 25.6 - MHz
3dB Bandwidth 26.1 26.25 - MHz
40dB Bandwidth - 28.60 28.80 MHz
Passband Ripple - 0.70 1.0 dB
Group Delay Variation - 35 80 nsec
Absolute Delay - 1.573 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 39nH
Source/Load Impedance = 50 ohms
Part No.:
835-IF115.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map