IF SAW Filter
Part Number Package Application Last Modified
835-IF100.0M-F 35.0 x 12.8 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
100.0 MHz Bandpass Filter
19.00 MHz Bandwidth

PART NUMBER :
835-IF100.0M-F
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 99.91 100.00 100.09 MHz
Insertion Loss - 24.5 27.0 dB
1dB Bandwidth 18.70 18.75 - MHz
3dB Bandwidth 19.0 19.05 - MHz
40dB Bandwidth - 20.15 20.20 MHz
Passband Ripple - 0.90 1.2 dB
Group Delay Variation - 50 100 nsec
Absolute Delay - 2.70 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - 128 LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 47nH C1 = 62pF
L2 = 47nH C2 = 8pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF100.0M-F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map