IF SAW Filter
Part Number Package Application Last Modified
827-IF70.0M-Z 27.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
70.0 MHz Bandpass Filter
6.6 MHz Bandwidth

PART NUMBER :
827-IF70.0M-Z
.
Horizontal : 3.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 1.2 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.90 70.00 70.1 MHz
Insertion Loss - 23.5 25.0 dB
1dB Bandwidth 6.3 6.5 - MHz
3dB Bandwidth 6.6 6.9 - MHz
40dB Bandwidth - 8.2 8.5 MHz
Passband Ripple - 0.6 1.0 dB
Group Delay Variation - 45 100 nsec
Absolute Delay - 2.865 - µsec
Ultimate Rejection 50 60 - dB
Substrate Material - YZ-LN - -
Ambient Temperature - 25 - C
Phase Linearity - 3.4 7.0 deg
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
827-IF70.0M-Z

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map