IF SAW Filter
Part Number Package Application Last Modified
827-IF70.0M-W 27.2 x 12.6 Thru Hole Base Station & Repeater Apr. 14 2003
.
TYPE :
70.0 MHz Bandpass Filter
1.5 MHz Bandwidth

PART NUMBER :
827-IF70.0M-W
.
Horizontal : 0.5 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.2 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.97 70.00 70.03 MHz
Insertion Loss - 21.6 23.5 dB
1dB Bandwidth 1.3 1.51 - MHz
3dB Bandwidth 1.5 1.71 - MHz
40dB Bandwidth - 2.45 2.7 MHz
Passband Ripple - 0.37 0.6 dB
Group Delay Variation - 161 200 nsec
Absolute Delay - 3.0 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
Phase Linearity - 2.7 7.0 deg
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 302nH C1 = 75pF
L2 = 270nH C2 = 75pF
Source/Load Impedance = 50 ohms
Part No.:
827-IF70.0M-W

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map