IF SAW Filter
Part Number Package Application Last Modified
827-IF70.0M-DA 27.0 x 12.0 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
70.0 MHz Bandpass Filter
26.25 MHz Bandwidth

PART NUMBER :
827-IF70.0M-DA
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.93 70.00 70.07 MHz
Insertion Loss - 24.2 25 dB
1dB Bandwidth 25.5 25.65 - MHz
3dB Bandwidth 26.1 26.25 - MHz
40dB Bandwidth - 28.45 28.7 MHz
Passband Ripple - 0.70 1.0 dB
Group Delay Variation - 42 70 nsec
Absolute Delay - 1.876 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - 128 LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 56nH L4 = 33nH
L2 = 120nH L5 = 180nH
L3 = 56nH
Source/Load Impedance = 50 ohms
Part No.:
827-IF70.0M-DA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map