IF SAW Filter
Part Number Package Application Last Modified
827-IF140.0M-E 27.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
140.0 MHz Bandpass Filter
250 KHz Bandwidth

PART NUMBER :
827-IF140.0M-E
.
Horizontal : 1.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.1 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 139.96 140.0 140.04 MHz
Insertion Loss - 21.0 24.0 dB
1dB Bandwidth 0.14 0.18 - MHz
3dB Bandwidth 0.25 0.31 - MHz
40dB Bandwidth - 0.84 0.90 MHz
Group Delay Variation - 55 150 nsec
Absolute Delay - 3.616 - µsec
Ultimate Rejection 40 50 - dB
Substrate Material - Qz - -
Ambient Temperature - 25 - C
Phase Linearity - 1.0 7.0 deg
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
827-IF140.0M-E

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map