IF SAW Filter
Part Number Package Application Last Modified
827-IF120.0M-B 27.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
120.0 MHz Bandpass Filter
26.1 MHz Bandwidth

PART NUMBER :
827-IF120.0M-B
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 119.9 120.0 120.1 MHz
Insertion Loss - 23.0 25.0 dB
1dB Bandwidth 25.5 25.65 - MHz
3dB Bandwidth 26.1 26.25 - MHz
40dB Bandwidth - 28.70 28.9 MHz
Passband Ripple - 0.70 1.0 dB
Group Delay Variation - 35 80 nsec
Absolute Delay - 1.52 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - 128 Degree LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 39nH
L2 = 27nH C2 = 15pF
Source/Load Impedance = 50 ohms
* PKG ground required for excellent spurious levels
Part No.:
827-IF120.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map