IF SAW Filter
Part Number Package Application Last Modified
827-IF120.0M-A 27.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
120.0 MHz Bandpass Filter
0.9 MHz Bandwidth

PART NUMBER :
827-IF120.0M-A
.
Horizontal : 0.4 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.2 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 119.96 120.0 120.04 MHz
Insertion Loss - 18.7 20.0 dB
1.5dB Bandwidth 0.9 0.99 - MHz
35dB Bandwidth - 1.6 1.73 MHz
50dB Bandwidth - 1.74 1.8 MHz
Passband Ripple - 0.46 .8 dB
Group Delay Variation - 310 400 nsec
Absolute Delay - 3.45 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - Qz - -
Ambient Temperature - 25 - C
Phase Linearity - 4.85 8 deg
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 56nH C1 = 62pF
L2 = 47nH C2 = 68pF
Source/Load Impedance = 50 ohms
Part No.:
827-IF120.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map