IF SAW Filter
Part Number Package Application Last Modified
820-IF78.6M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 02 2003
.
TYPE :
78.6 MHz Bandpass Filter
5.8 MHz Bandwidth

PART NUMBER :
820-IF78.6M-A
.
Horizontal : 2.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.8 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 78.55 78.60 78.65 MHz
Insertion Loss - 18.1 21.0 dB
1dB Bandwidth 5.3 5.4 - MHz
3dB Bandwidth 5.8 6.0 - MHz
40dB Bandwidth - 7.87 8.0 MHz
Passband Ripple - 0.7 1.0 dB
Group Delay Variation - 155 200 nsec
Absolute Delay - 2.10 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - YZ-LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
820-IF78.6M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map