IF SAW Filter
Part Number Package Application Last Modified
820-IF76.9M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 24 2003
.
TYPE :
76.9 MHz Bandpass Filter
3.70 MHz Bandwidth

PART NUMBER :
820-IF76.9M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 76.84 76.90 76.96 MHz
Insertion Loss - 27.8 30.0 dB
3dB Bandwidth 3.70 3.85 - MHz
40dB Bandwidth - 5.30 5.50 MHz
Passband Ripple - 0.40 1.0 dB
Group Delay Variation - 60 100 nsec
Ultimate Rejection - 50 - dB
Substrate Material - LN - -
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


No Matching Required
Source/Load Impedance = 50 ohms
Part No.:
820-IF76.9M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map