IF SAW Filter
Part Number Package Application Last Modified
820-IF70.0M-EA 20.2 x 12.6 Thru Hole Base Station & Repeater May 24 2003
.
TYPE :
70.0 MHz Bandpass Filter
9.45 MHz Bandwidth

PART NUMBER :
820-IF70.0M-EA
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.95 70.00 70.05 MHz
Insertion Loss - 20.5 22.0 dB
1dB Bandwidth 9.15 9.20 - MHz
3dB Bandwidth 9.45 9.50 - MHz
40dB Bandwidth - 10.82 10.85 MHz
50dB Bandwidth - 10.95 11.00 MHz
Passband Ripple - 0.60 1.0 dB
Group Delay Variation - 70 150 nsec
Absolute Delay - 2.330 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


No Matching Required
Source/Load Impedance = 50 ohms
Part No.:
820-IF70.0M-EA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map