IF SAW Filter
Part Number Package Application Last Modified
820-IF70.0M-E 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF70.0M-E

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.94 70.00 70.06 MHz
Insertion Loss - 23.0 28.0 dB
1dB Bandwidth 0.91 1.0 - MHz
3dB Bandwidth 1.1 1.2 - MHz
40dB Bandwidth - 1.95 2.0 MHz
Passband Ripple - 0.4 0.8 dB
Group Delay Variation - 100 150 nsec
Absolute Delay - 2.6 - µsec
Ultimate Rejection 40 50 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF70.0M-E

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map