IF SAW Filter
Part Number Package Application Last Modified
820-IF70.0M-AA 20.2 x 12.6 Thru Hole Base Station & Repeater May 02 2003
.
TYPE :
70.0 MHz Bandpass Filter
10.3 MHz Bandwidth

PART NUMBER :
820-IF70.0M-AA
.
Horizontal : 3.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 1.4 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.94 70.00 70.06 MHz
Insertion Loss - 21.0 23.0 dB
1dB Bandwidth 10.00 10.15 - MHz
3dB Bandwidth 10.30 10.50 - MHz
40dB Bandwidth - 11.95 12.10 MHz
Passband Ripple - 0.7 1.0 dB
Group Delay Variation - 50 100 nsec
Absolute Delay - 2.31 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 47nH
L2 = 47nH
Source/Load Impedance = 50 ohms
Part No.:
820-IF70.0M-AA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map