IF SAW Filter
Part Number Package Application Last Modified
820-IF70.0M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 02 2003
.
TYPE :
70.0 MHz Bandpass Filter
8.5 MHz Bandwidth

PART NUMBER :
820-IF70.0M-A
.
Horizontal : 3.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 1.2 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.94 70.00 70.06 MHz
Insertion Loss - 20.0 22.0 dB
1dB Bandwidth 8.3 8.5 - MHz
3dB Bandwidth 8.5 8.7 - MHz
40dB Bandwidth - 10.2 10.5 MHz
Passband Ripple - 0.7 1.0 dB
Group Delay Variation - 70 100 nsec
Absolute Delay - 2.55 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - YZ-LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 100nH
L2 = 100nH
Source/Load Impedance = 50 ohms
Part No.:
820-IF70.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map