IF SAW Filter
Part Number Package Application Last Modified
820-IF63.0M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 24 2003
.
TYPE :
63.0 MHz Bandpass Filter
3.80 MHz Bandwidth

PART NUMBER :
820-IF63.0M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 63.0 - MHz
Insertion Loss at Fo - 14.0 15.0 dB
3dB Bandwidth - 3.80 - MHz
40dB Bandwidth - 5.2 - MHz
Passband Ripple - 0.40 0.6 dB
Group Delay Variation - 60 100 nsec
Ultimate Attenuation - 50 - dB
Substrate Material - LN - -
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
820-IF63.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map