IF SAW Filter
Part Number Package Application Last Modified
820-IF160.0M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
160.0 MHz Bandpass Filter
24.0 MHz Bandwidth

PART NUMBER :
820-IF160.0M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 160.0 - MHz
Insertion Loss - 25.5 27.0 dB
3dB Bandwidth 24.0 24.3 - MHz
40dB Bandwidth - 27.8 28.0 MHz
Passband Ripple - 0.7 1.0 dB
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
* PKG ground required for excellent spurious levels
Part No.:
820-IF160.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map