IF SAW Filter
Part Number Package Application Last Modified
820-IF140.0M-F 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
140.0 MHz Bandpass Filter
34.0 MHz Bandwidth

PART NUMBER :
820-IF140.0M-F
.
Horizontal : 10.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 6.0 MHz/Div
Veritical : 1 dB/Div
Veritical : 50 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 139.75 140.0 140.25 MHz
Insertion Loss - 22.2 24.0 dB
1dB Bandwidth 33.0 34.0 - MHz
3dB Bandwidth 34.0 35.4 - MHz
40dB Bandwidth - 40.4 42.0 MHz
Passband Ripple - 0.65 1.0 dB
Group Delay Variation - 20 50 nsec
Absolute Delay - 0.96 - µsec
Ultimate Rejection 50 60 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
Phase Linearity - 7.5 10.0 degc
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 68nH
L2 = 82nH
Source/Load Impedance = 50 ohms
Part No.:
820-IF140.0M-F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map