IF SAW Filter
Part Number Package Application Last Modified
820-IF140.0M-B 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
140.0 MHz Bandpass Filter
12.0 MHz Bandwidth

PART NUMBER :
820-IF140.0M-B
.
Horizontal : 2.0MHz/Div
Veritical : 10 dB/Div
Horizontal : 2.0 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 139.9 140.0 140.1 MHz
Insertion Loss - 22.3 25.0 dB
1dB Bandwidth 11.2 11.6 - MHz
3dB Bandwidth 12.0 12.24 - MHz
40dB Bandwidth - 14.56 15.0 MHz
Passband Ripple - 0.57 0.75 dB
Group Delay Variation - 45 90 nsec
Absolute Delay - 1.62 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
820-IF140.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map