IF SAW Filter
Part Number Package Application Last Modified
820-IF129.3M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 02 2003
.
TYPE :
129.3 MHz Bandpass Filter
11.3 MHz Bandwidth

PART NUMBER :
820-IF129.3M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 129.30 - MHz
Insertion Loss - 22.0 25.0 dB
1dB Bandwidth 10.80 10.89 - MHz
3dB Bandwidth 11.20 11.33 - MHz
40dB Bandwidth - 13.06 13.20 MHz
Passband Ripple - 0.5 1.0 dB
Group Delay Variation - 94 200 nsec
Absolute Delay - 1.98 - µsec
Ultimate Rejection 55 60 - dB
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
820-IF129.3M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map