IF SAW Filter
Part Number Package Application Last Modified
820-IF114.99M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003
.
TYPE :
114.99 MHz Bandpass Filter
1.8 MHz Bandwidth

PART NUMBER :
820-IF114.99M-A
.
Horizontal : 0.8 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.4 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 114.95 114.99 115.03 MHz
Insertion Loss - 20.0 23.0 dB
0.5dB Bandwidth 1.4 1.6 - MHz
3dB Bandwidth 1.8 2.05 - MHz
50dB Bandwidth - 3.44 3.8 MHz
Passband Ripple - 0.3 0.5 dB
Group Delay Variation - 100 200 nsec
Absolute Delay - 1.9 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - Qz - -
Ambient Temperature - 25 - C
Phase Linearity - 2.5 7.0 degc
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 100nH C1 = 56pF
L2 = 86nH C2 = 56pF
Source/Load Impedance = 50 ohms
Part No.:
820-IF114.99M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map