IF SAW Filter
Part Number Package Application Last Modified
819-IF70.0M-X 19 x 6.5 SMD Base Station & Repeater January 2011

PART NUMBER :
819-IF70.0M-X

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.97 70.00 70.03 MHz
Insertion Loss - 18.2 20.0 dB
1dB Bandwidth 0.95 1.10 - MHz
3dB Bandwidth 1.1 1.3 - MHz
40dB Bandwidth - 2.05 2.20 MHz
Passband Ripple - 0.5 0.8 dB
Group Delay Variation - 194 220 nsec
Absolute Delay - 2.04 - µsec
Ultimate Rejection 40 45 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Phase Linearity (Fo 0.5MHz) - 3.9 6.0 deg
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, E, G, H, I, J Ground
A In
F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
819-IF70.0M-X

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map