IF SAW Filter
Part Number Package Application Last Modified
819-IF190.0M-C 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 May 22 2003
.
TYPE :
190.0 MHz Bandpass Filter
4.30 MHz Bandwidth

PART NUMBER :
819-IF190.0M-C
.
Horizontal : 2.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 1.0 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 189.95 190.00 190.05 MHz
Insertion Loss - 21.0 23.0 dB
1dB Bandwidth 4.0 4.07 - MHz
3dB Bandwidth 4.3 4.43 - MHz
40dB Bandwidth - 5.70 5.80 MHz
Passband Ripple - 0.70 1.0 dB
Group Delay Variation - 160 200 nsec
Absolute Delay - 2.16 - µsec
Ultimate Rejection 40 50 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Phase Linearity - 4.9 7.0 deg
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = (56+15)nH L2 = 68nH
C1 = 47pF (43) C2 = 43pF (47)
Source/Load Impedance = 50 ohms
Part No.:
819-IF190.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map