IF SAW Filter
Part Number Package Application Last Modified
819-IF190.0M-A 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 May 22 2003
.
TYPE :
190.0 MHz Bandpass Filter
1.22 MHz Bandwidth

PART NUMBER :
819-IF190.0M-A
.
Horizontal : 1.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.2 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 189.95 190.00 190.05 MHz
Insertion Loss - 19.0 22.0 dB
1dB Bandwidth 1.10 1.14 - MHz
3dB Bandwidth 1.22 1.30 - MHz
25dB Bandwidth - 1.80 1.85 MHz
33dB Bandwidth - 1.91 1.96 MHz
Passband Ripple - 0.50 1.0 dB
Group Delay Variation - 120 200 nsec
Ultimate Rejection 32 38 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Phase Linearity - 3.0 7.0 deg
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 56nH L2 = 39nH
C1 = 22pF C2 = 27pF
Source/Load Impedance = 50 ohms
Part No.:
819-IF190.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map