IF SAW Filter
Part Number Package Application Last Modified
819-IF160.0M-F 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 January 2011

PART NUMBER :
819-IF160.0M-F

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 159.95 160.0 160.05 MHz
Insertion Loss - 17.0 21.0 dB
1.5dB Bandwidth 1.26 1.37 - MHz
35dB Bandwidth - 2.25 2.40 MHz
40dB Bandwidth - 2.38 2.50 MHz
Passband Ripple - 0.53 0.75 dB
Group Delay Variation - 180 220 nsec
Absolute Delay - 2.5 - µsec
Ultimate Rejection 50 55 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Phase Linearity   - 2.7 3.0 deg
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, E, G, H, I, J Ground
A In
F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
819-IF160.0M-F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map