IF SAW Filter
Part Number Package Application Last Modified
819-IF160.0M-E 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 May 30 2003
.
TYPE :
160.0 MHz Bandpass Filter
1.30 MHz Bandwidth

PART NUMBER :
819-IF160.0M-E
.
Horizontal : 1.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.2 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 159.95 160.0 160.05 MHz
Insertion Loss - 18.0 21.0 dB
0.5dB Bandwidth 1.18 1.35 - MHz
3dB Bandwidth 1.30 1.60 - MHz
30dB Bandwidth - 2.2 3.0 MHz
Passband Ripple - 0.49 0.8 dB
Group Delay Variation - 170 200 nsec
Absolute Delay - 2.5 - µsec
Ultimate Rejection 35 50 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Phase Linearity - 2.9 7.0 deg
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 80nH L2 = 56nH
C1 = 36pF C2 = 39pF
Source/Load Impedance = 50 ohms
Part No.:
819-IF160.0M-E

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map