IF SAW Filter
Part Number Package Application Last Modified
819-IF153.6M-A 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 May 22 2003
.
TYPE :
153.6 MHz Bandpass Filter
2.10 MHz Bandwidth

PART NUMBER :
819-IF153.6M-A
.
Horizontal : 1.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.4 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 153.56 153.60 153.64 MHz
Insertion Loss - 19.0 20.0 dB
1dB Bandwidth 1.80 2.0 - MHz
3dB Bandwidth 2.10 2.30 - MHz
30dB Bandwidth - 3.30 3.50 MHz
Passband Ripple - 0.45 0.60 dB
Group Delay Variation - 190 220 nsec
Absolute Delay - 2.20 - µsec
Ultimate Rejection 40 45 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Phase Linearity - 5.0 7.0 deg
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 78nH L2 = 68nH
C1 = 47pF C2 = 39pF
Source/Load Impedance = 50 ohms
Part No.:
819-IF153.6M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map