IF SAW Filter
Part Number Package Application Last Modified
819-IF150.0M-B 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 January 2011

PART NUMBER :
819-IF150.0M-B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 149.97 150.00 150.03 MHz
Insertion Loss - 22.0 25.0 dB
1dB Bandwidth 1.26 1.31 - MHz
3dB Bandwidth 1.50 1.54 - MHz
30dB Bandwidth - 2.22 2.26 MHz
Passband Ripple - 0.35 0.7 dB
Group Delay Variation - 150 200 nsec
Absolute Delay - 2.45 - µsec
Ultimate Rejection 40 50 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Phase Linearity - 2.0 5 degc
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, E, G, H, I, J Ground
A In
F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
819-IF150.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map