IF SAW Filter
Part Number Package Application Last Modified
819-IF100.0M-C 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 August 2011

PART NUMBER :
819-IF100.0M-C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 99.97 100.0 100.03 MHz
Insertion Loss - 13.7 15.0 dB
1dB Bandwidth 0.30 0.34 - MHz
3dB Bandwidth 0.47 0.55 - MHz
40dB Bandwidth - 1.38 1.40 MHz
Passband Ripple - 0.8 1.5 dB
Group Delay Variation - 250 500 nsec
Absolute Delay - 2.4 - µsec
Ultimate Rejection 45 55 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Phase Linearity   - 3.0 6.0 deg
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, E, G, H, I, J Ground
A In
F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
819-IF100.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map