IF SAW Filter
Part Number Package Application Last Modified
819-IF100.0M-B 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 May 30 2003
.
TYPE :
100.0 MHz Bandpass Filter
100.0 KHz Bandwidth

PART NUMBER :
819-IF100.0M-B
.
Horizontal : 0.2 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.4 MHz/Div
Veritical : 1 dB/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 100.0 - MHz
Insertion Loss - 12.5 15.0 dB
1dB Bandwidth 84.0 88.0 - KHz
3dB Bandwidth 105.0 115.0 - KHz
40dB Bandwidth - 375.0 400.0 KHz
Passband Ripple - 0.3 0.6 dB
Group Delay Variation - 2.2 2.7 nsec
Absolute Delay - 6.2 - µsec
Ultimate Rejection 40 45 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 352nH L2 = 320nH
C1 = 36pF C2 = 2pF
C3 = 62pF C4 = 3pF
Source/Load Impedance = 50 ohms
Part No.:
819-IF100.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map